KEY OPERATOR PROGRAMS
SPECIAL SETTINGS
IP address settings
This program is used to set the "IP ADDRESS", "SUBNETMASK", and "DEFAULT GATEWAY". The following screen appears when this program is selected.
IP ADDRESS SETT-
INGS
IP ADDRESS
0 0 0 0
1 Enter the IP address, subnet mask, and default gateway.
|
|
| These move the cursor up and | |
[ | ][ | ] keys | down to select "IP ADDRESS", | |
"SUBNETMASK", and | ||||
|
|
| ||
|
|
| "DEFAULT GATEWAY". | |
[ | ][ | ] keys | These move the cursor left | |
and right. | ||||
|
|
| ||
Numeric keys | These are used to enter | |||
numbers. | ||||
|
|
| ||
[C]key (
) Use this to cancel an entry.
| This cancels an entry and | |
[BACK] key | returns you to the previous | |
| screen. | |
| This cancels the setting and | |
| returns the display to the | |
[CA] key ( ) | base screen of the mode that | |
was in effect before the key | ||
| ||
| operator programs were | |
| entered. | |
| This cancels the setting and | |
| returns the display to the | |
[SPECIAL | base screen of the mode that | |
FUNCTION] key | was in effect before the key | |
| operator programs were | |
| entered. |
5
2 When you have completed all settings, press the [OK] key.
The settings will be saved.
3 Turn off the machine power, wait for a few seconds, and then turn on the power again.
The new settings will take effect after the power is turned on.
33
