WEB FUNCTIONS OF THE MACHINE
KEY OPERATOR PROGRAMS
The key operator programs are used to prohibit changes to the [Condition Settings] and to configure interface settings.
•Default settings: Select the setting for which you wish to prohibit changes.
•Interface settings: Enable monitoring of data sent to the network port and set restrictions.
Configuring a setting in the key operator programs
1 Click [Key operator programs] in the menu frame.
The "Default Settings" screen of the [Key operator programs] will appear. If you wish to select a setting in the "Default Settings" screen, go to step 3.
2 Click the desired setting.
Key operator programs
3 Make a selection for the setting in the screen that appears.
See "Key operator programs" for descriptions of the settings.
4 Click [Submit] to store the entered information.
When "YES, NO" appears in the "Settings" column, "YES" is selected when a checkmark appears in the checkbox of the item, and "NO" is selected when checkmark does not appear.
Default settings
Item | Settings | Description |
|
|
|
Prohibit Test Page Printing | YES, NO | This setting is used to prohibit printing of a printer test page. |
|
|
|
Disable Default Setting | YES, NO | This setting is used to prohibit changes to the default |
Changes |
| condition settings. |
|
|
|
Disabling of Clock | YES, NO | This setting is used to prohibit changes to the date and time |
Adjustment |
| settings. This item does not appear when the fax option is installed. |
|
|
|
Interface settings
Item | Settings | Description |
|
|
|
Hexadecimal Dump | YES, NO | This program is used to print out the print data from the |
Mode |
| computer in hexadecimal and in the corresponding text |
|
| characters (based on ASCII code). This allows you to |
|
| check whether or not print data is being correctly sent from |
|
| the computer. |
|
|
|
I/O Timeout | 1- 60 - 999 (sec) | During reception of a print job, if remaining data is not |
|
| received after the time set here elapses, the port |
|
| connection is broken and the next print job is begun. |
|
|
|
Emulation Switching | Auto*, PostScript*, PCL | Select the printer language. When [Auto] is selected, the |
|
| language is automatically selected from the data sent to |
|
| the printer. Unless errors occur frequently, do not change |
|
| the setting from [Auto] to another setting. |
|
| *Only when the PS3 expansion kit is installed. |
|
|
|
Port Switching Method | Switch at End of Job, | Select the method for switching network ports. |
| Switch after I/O Timeout |
|
|
|
|
28