ABOUT THE WEB PAGES (FOR THE ADMINISTRATOR)
In addition to the menus that appear for users, other menus that can only be used by the administrator appear in the administrator Web pages.
A menu frame appears on the left side of the page. When you click an item in the menu, a screen appears in the right frame that allows you to configure settings for that item. Settings that can only be configured by the administrator are explained here.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(1)Information
Configure machine identification information for the status & alert
☞Information setup (page 29)
(2)Passwords
To protect the Web site, the system administrator can establish passwords. Enter a password that you would like to establish and click the [Submit] button. One password can be established for the administrator and one password can be established for users.
☞PROTECTING INFORMATION PROGRAMMED IN THE WEB PAGE ([PASSWORDS]) (page 26)
(3)Key Operator Programs
Setting changes can be prohibited and interface settings can be configured.
4
(5)Alerts Message
Store destination addresses for alert messages.
☞Alerts message setup (page 30)
(6)Security
Unused ports can be disabled for greater security and port numbers can be changed.
If "HTTP" is disabled, it will not be possible Note to open the Web pages. To open the Web
pages, reset the network expansion kit.
☞"How to reset the network expansion kit" (page 37)
(7)Services
Configure information concerning the
☞SMTP setup (page 29)
☞KEY OPERATOR PROGRAMS (page 28)
(4)Status Message
Configure parameters required for sending status messages, such as destination addresses and time schedules.
☞Status message setup (page 30)
(8)Print Port
Configure settings for
☞Setting up the
25
