Epson C83202 Select command to send (list)

You can reset the printer by clicking the Reset Printer button. Enable or disable the startup page by clicking Enable or Disable. To send printer control commands, follow the steps below:

1.First, type in the command strings in the Enter text to send box.

2.Click the Add TO List command to send

button to copy the strings to the Select list.

3.Click the command line in the Select command to send list.

4.Click the Send Text button. Then the selected command line is sent to the printer and the current status of the printer is displayed in the status box.

Note:

You can send any command in ASCII characters using this feature.

Select command to send (list)

The command strings are saved in this list. You can add strings using the Add TO List button and remove the strings using the Delete From List button.

Using the EpsonScript Driver Utility 3-17