❏Unplug the printer and refer servicing to a qualified service representative under the following conditions:

A.If liquid has entered the printer.B.If the printer has been exposed to rain or water.

C.If the printer does not operate normally or exhibits a distinct change in performance.

D.If the printer has been dropped or the cabinet damaged.E.When the power cord or plug is damaged or frayed.

❏Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and may require repairs by a qualified service representative.

❏If you plan to use the printer in Germany, observe the following:

To provide adequate short-circuit protection and over- current protection for this printer, the building installation must be protected by a 10 or 16 amp circuit breaker.

Note for German-speaking users:

Bei Anschluss des Druckers an die Stromversorgung muss sichergestellt werden, dass die Gebäudeinstallation mit einer 10 A- oder 16 A-Sicherung abgesichert ist.

Warnings, Cautions, and Notes

wWarnings must be followed carefully to avoid bodily injury.

cCautions must be observed to avoid damage to your equipment.

Notes contain important information and useful tips on the operation of your printer.

Safety Instructions

5