Attaching the Paper Support Insert the paper support into the central slot at the rear of the
printer as shown below.
Choosing a Place for the Printer Follow the guidelines listed below when selecting a location for
your printer.
❑Place the printer on a flat, stable surface. The printer will
not operate properly if it is tilted or at an angle.
❑Place the printer close enough to the computer for the
interface cable to reach it easily.
❑Leave enough room on the table at the front of the printer
for the paper to fl ow freely out of it.
❑Leave adequate room for easy operation and maintenance.
❑Avoid using or storing the printer in places subject to rapid
changes in temperature and humidity. Also keep it away
from direct sunlight, strong light, or heat sources.
07
2
R
Hudson++ Ref. Guide
Rev.c
A5 size Chapter 2
03-04-97 DR, pass 0
Setting Up the Printer 2-3