P is on

The Ppower light is on when the printer is on and ready to print. It

 

flashes when the printer is receiving a print job, charging ink, or

 

cleaning the print head.

 

 

S flashes and

When the S paper out light flashes and both ink out lights come on,

B and A are on

you have a paper jam. Press the S load/eject button to try to clear the

 

jam. If that doesn’t work, turn off the printer and gently pull out all the

 

paper. Make sure none of the sheets are curled, creased, old, stuck

 

together, or too thin. Then reload the paper against the right edge

 

guide and slide the left edge guide against it. Turn on the printer and

 

press the S load/eject button to resume printing.

 

 

S is on

When the S paper out light comes on, your paper is out or incorrectly

 

loaded. Make sure none of the sheets are curled, creased, old, stuck

 

together, or too thin. Then reload the paper against the right edge

 

guide and slide the left edge guide against it. Press the S load/eject

 

button to resume printing.

 

 

B or A flash

When an ink out light flashes, your ink supply is low. Make sure you

 

have a replacement cartridge (black S020189, color S020191).

 

 

B or A are on

When an ink out light comes on, you need to replace the ink cartridge.

 

Make sure you have a replacement cartridge (black S020189, color

 

S020191). See page 41 for replacement instructions.

 

 

P and S flash

When the Ppower and S paper out lights flash, and one or both of the

and

ink out lights come on, jammed paper may be blocking movement of

B and A are on

the print head or you may not have removed the yellow tape seal from

 

the installed ink cartridge(s). Turn off the printer, open the cover, and

 

check inside for any jammed paper. Then turn the printer back on. If an

 

ink out light remains on and the print head moves into replacement

 

position, replace the ink cartridge(s) as described on page 44. If the

 

lights still flash and/or come on, contact your dealer or EPSON; see

 

page 61 for contact information.

 

 

P S B A flash

When all the lights flash, your printer may have an internal error. Make

 

sure you removed all the packing material as described on the

 

unpacking sheet in your printer box. Then turn off the printer, wait a

 

few seconds, and turn it on again. If the lights still flash, contact your

 

dealer or EPSON; see page 61 for contact information.

 

 

P S B A are off

When all the lights are off, the printer is not receiving power. Try these

 

solutions:

 

■ Make sure the printer is turned on.

 

■ Turn off the printer, plug in the power cord securely, and turn on

 

the printer again.

 

■ Make sure the outlet is operable and is not controlled by a switch

 

or timer. If in doubt, try using another outlet.

 

 

50