Too many copies are printing . . .
Make sure the Copies settings in the printer software and your application aren’t both set for multiple copies.
Paper doesn’t eject fully or is wrinkled . . .
■If the paper doesn’t eject fully, you
may have set the wrong paper size. Press the S load/eject button to eject the paper. Then select the correct paper size in your application or printer software.
■If it’s wrinkled when it ejects, the paper may be damp or too thin.
Paper doesn’t feed . . .
Remove the stack of paper from the sheet feeder. Check that the paper:
■Isn’t curled or creased
■Isn’t too old
■Isn’t loaded above the arrow on the left edge guide
■Isn’t jammed inside the printer. (If the S paper out light is flashing, paper is jammed.)
When you reload the paper, make sure the left edge guide fits the paper.
Paper jams inside the printer . . .
Turn off your printer, open the cover, and remove all the paper that’s inside, including any small pieces that may have torn off.
If your paper jams frequently:
■Use smooth,
■Fan the stack and then even the edges before loading it.
■Don’t load paper above the arrow mark on the left edge guide.
■Place the paper against the right edge guide and slide the left edge guide against your paper.
Multiple pages feed at once . . .
Remove the stack of paper from the printer. Then:
■Make sure the paper isn’t too thin.
■Fan the edges of the stack of paper to separate the sheets.
■Reload the paper as described on page 14.
■Make sure the edge guides are snug against the paper.
58