Matte Paper - Heavyweight

Matte Paper - Heavyweight has a professional-looking, flat matte finish for printing photos and graphics on a non-glossy surface. Load up to

20 sheets as described on page 11, including a support sheet beneath the stack. Before printing, select Matte Paper - Heavyweight as the Media Type setting.

EPSON Photo Paper

You can use EPSON Photo Paper to print photographs that look almost as good as the ones you get from film processing. Photo Paper is available in a variety of sizes; see the inside back cover for a list and ordering information.

Keep the following in mind when using EPSON Photo Paper:

■Always load the paper with the whiter (glossier) side facing up.

■Load up to 20 sheets of 4 × 6-inch, or letter-size Photo Paper, or

1 sheet of Panoramic paper. Use a support sheet if it is included in the paper package.

■Select Photo Paper as the Media Type setting.

■To keep your printouts looking their best, store them in a resealable plastic bag or other airtight covering and protect them from heat, humidity, and direct sunlight. Return unused paper to the original package as soon as you finish printing.

If you’re using letter-size Photo Paper, follow the instructions on page 11 to load and print on the paper. If you’re using 4 × 6-inch or Panoramic Photo Paper, see the next sections.

4 × 6-inch Photo Paper

EPSON 4 × 6-inch Photo Paper is micro-perforated around the edges so you can trim your printouts and “bleed” the photo—

extend it to the edge of the paper—on all sides.

1. Load the paper against the right edge guide with the glossy side facing up and the perforated margins positioned as shown. Then slide the left edge guide against the paper.

You can load up to 20 sheets at a time, with the included support sheets A and B beneath the stack. (If you don’t have the support sheets, use plain paper cut to size.)

23