Epson CPD-9992 manual 44

P is on	The Ppower light is on when the printer is on and ready to print. It flashes
	when the printer is receiving a print job, charging ink, or cleaning the print head.
S flashes	When the S paper out light flashes, you have a paper jam. Press the
	E load/eject button to try to clear the jam. If that doesn’t work, turn off the
	printer and gently pull out all the paper. Make sure none of the sheets are
	curled, creased, old, stuck together, or too thin. Then reload the paper against
	the right edge guide and slide the left edge guide against it. Turn on the printer
	and resume printing.
S is on	When the S paper out light comes on, your paper is out or incorrectly loaded.
	Make sure none of the sheets are curled, creased, old, stuck together, or too
	thin. Then reload the paper against the right edge guide and slide the left edge
	guide against it. Press the E load/eject button to resume printing.
B or A flash	When an ink out light flashes, your ink supply is low. Make sure you have a
	replacement cartridge (black S020187, color S020191).
B or A are on	When an ink out light comes on, you need to replace the ink cartridge. Make
	sure you have a replacement cartridge (black S020187, color S020191). See
	page 30 for replacement instructions.
P and S flash	When the P power and S paper out lights flash, and one or both of the ink out
and	lights come on, jammed paper may be blocking movement of the print head or
B and A are on	you may not have removed the yellow tape seal from the installed ink
	cartridge(s). Turn off the printer, open the cover, and check inside for any
	jammed paper. Then turn the printer back on. If an ink out light remains on and
	the print head moves into replacement position, replace the ink cartridge(s) as
	described on page 33. If the lights still flash and/or come on, contact your
	dealer or EPSON; see page 47 for contact information.
P S B A flash	When all the lights flash, your printer may have an internal error. Make sure you
	removed all the packing material as described on the unpacking sheet in your
	printer box. Then turn off the printer, wait a few seconds, and turn it on again. If
	the lights still flash, contact your dealer or EPSON; see page 47 for contact
	information.
P S B A are off	When all the lights are off, the printer is not receiving power. Try these
	solutions:

■ Make sure the printer is turned on.

■ Turn off the printer, plug in the power cord securely, and turn on the printer again.

■ Make sure the outlet is operable and is not controlled by a switch or timer. If in doubt, try using another outlet.

39