Epson CPD5719 Using Macintosh with the Ethernet Card, EPSON Net, Monitoring the Printers on Your Network, lnstalling EPSON Net

Using Macintosh with the Ethernet Card

Before configuring the Ethernet card, check to see if the correct printer driver is installed in the Macintosh. Make sure the printer is turned on and the Ethernet card is connected to the network. (See your Ethernet card User’s Guide and your printer User’s Guide for more information.)

The information on Macintosh is explained in the following sections:

Ct Installing EPSON Net!

Ll Monitoring the Printers on Your Network

Ll Configuring the Ethernet Card for AppleTalk

Cl Configuring the Ethernet Card for TCP/IP Using EPSON Net! for Macintosh

Note:

lf you are using Macintosh computers on a NetWare network, configure the card using EPSON Net! for NetWare Windows from a Windows workstation or EPSON Net! for NetWare DOS from a DOS workstation. See your Ethernet card User’s Guide for instructions.

lnstalling EPSON Net!

To install EPSON Net! for Macintosh, follow these steps:

1.Turn on your Macintosh.

2.Create a folder for EPSON Net! on your hard drive.

3.Insert the EPSON Net! for Macintosh disk in the drive.

4.Copy the program from the disk to the folder.

Monitoring the Printers on Your Network

You can monitor and check the status of all printers connected to your network according to the protocol you use.

EPSON Ethernet Card Supplement 3