6.Click OK to send the new settings to the Ethernet card and return to the EPSON Net! dialog box. Click Update to send the new settings to the card without closing the Configuration dialog box.
Caution:
Once you make changes to the Ethernet card, wait at least five minutes before turning off or restarting your printer.
7.Click Exit to exit EPSON Net! for Macintosh.
Configuring the Ethernet Card for TCP/IP Using EPSON Net! for Macintosh
To configure the Ethernet Card for TCP/IP using EPSON Net! for Macintosh, follow these steps:
1.Open the EPSON Net! folder and
Note:
If you do not know how to find out your computer’s IP address or the IP address for the Ethernet card, ask your network administrator, or follow the instructions on page 11.
2.Highlight the printer you want to configure in the list.
3.Click Open to open the Configuration dialog box.
8 EPSON Ethernet Card Supplement