Epson CPD5719 Selecting a Zone

To check the status of all printers that are turned on and enabled for a protocol, follow the steps below:

1.Open the EPSON Net! folder and click the EPSON Net! icon. The following window appears:

Note:

If you don‘t see any printers in the list, try selecting the zone that the printer is in or all zones by following the steps in the next section.

2.To exit EPSON Net!, click Quit.

Selecting a Zone

You can select which printers to monitor according to their zone or address. You must select a zone before you configure the Ethernet card in the Configuration dialog box. Follow these steps:

1.With the EPSON Net! dialog box open, choose Zone from the Options menu bar.

4 EPSON Ethernet Card Supplement