4.Click the TCP/IP icon. Make sure the Configuration dialog box shows the correct serial number of the target Ethernet card.

5.Set the following options in the TCP/IP Configuration dialog box:

U IP address: Determine and assign an IP address for the Ethernet card.

Q Subnet mask: Assign the subnet mask.

tl Auto IP set: Click Off.

6.Click Update to send the new settings to the Ethernet card without closing the Configuration dialog box. Or, click OK to send the new settings and return to the EPSON Net! dialog box.

7.Click Exit to exit EPSON Net! for Macintosh.

After configuring the Ethernet card for TCP/IP, set up your printer on each Macintosh and make sure that the TCP/IP network works correctly.

Using TCP/IP in Windows 95

You can configure the Ethernet card for TCP / IP if you are using Windows 95 on a TCP / IP network, or a Windows 95 peer-to-peer network.

Installing TCP/IP in Windows 95

1.Click Start, point to Settings, and click Control Panel.

2.Double-click the Network icon.

3.If TCP/IP appears in the list of installed network components on the Configuration menu, you can skip to “Configuring the Ethernet Card for TCP/IP and Windows 95.” If TCP/IP does not appear in the list, click Add.

EPSON Ethernet Card Supplement 9