EPSON AcuLaser CX11 Series Basic Operation Guide
Basic Faxing (Fax Model Only)
Sending faxes
Basics of sending faxes
1.Make sure that the product is turned on.
2.Press the 
Fax button on the control panel.
The Fax light is lit and the LCD panel shows Fax Mode for a few seconds, then changes to the fax mode’s screen.
Note:
❏Do not turn off the power or press another mode’s button while faxing, as the fax process may be performed incorrectly.
❏If no button is pressed for more than 3 minutes, any changes made are canceled and the mode returns to the Print mode.
❏Pressing the One Touch Dial button
(A, B, or C) can also enter the Fax mode without pressing the 
Fax button.
3.Place your original either on the document table or in the Auto Document Feeder. For details, see “Setting your originals.”
4.Enter the recipient’s fax number directly from the numeric keypad on the control panel.
Note:
❏A maximum of 50 characters can be entered for a recipient.
❏If an incorrect number is entered, press the 
Reset button to delete a character left to the cursor. Pressing the l Left or r Right button moves the cursor left or right.
❏When entering the recipient number, numerics (0 to 9), #, and ✽ can be inserted using the numeric keypad.
❏When you press the Redial button instead of entering the recipient’s fax number, the fax number you previously transmitted is automatically entered.
❏When pressing the Pause button while entering the recipient number, a
❏You can also enter a fax number using the One Touch Dial button or the Speed Dial button. For details, see “Sending faxes using
5.Make the appropriate settings for your scanning purpose if necessary.
Note:
When you press the x B&W Start or
x Color Start button without making any settings here, the fax transmission starts with the existing setting values.
Basic Faxing (Fax Model Only) | 10 |