EPSON AcuLaser CX11 Series Basic Operation Guide
2.Press the d Down button twice to select Fax Settings, then press the r Right button.
3.Press the d Down button twice to select Reception Settings, then press the
r Right button.
4.Press the d Down button to select Incoming Mode, then press the r Right button.
The Reception Settings menu appears.
5.Press the u Up or d Down button to select your desired incoming mode, then press the r Right button.
6.To exit the settings, press the l Left button several times or another mode’s button.
Receiving faxes when you hear fax tones
This function is used to print fax data after answering the incoming call using the attached phone.
Note:
To use this function, your product needs to have an attached phone, and Incoming Mode in Reception Settings needs to be set to Auto switching. For details, see the User’s Guide.
1.Answer the incoming call using the attached phone.
2.Press the x B&W Start or x Color Start button after confirming the sender’s transmission is a fax.
The received data are printed by page as they are received.
Receiving faxes using fax polling
This function is used to get the information stored in the other party’s fax machine to your product.
1.Make sure that the product is in Fax mode. If not, press the 
Fax button to enter the Fax mode.
2.Enter the other party’s fax number using the numeric keypad.
3.Press the d Down button several times until Polling Rcptn appears, then press the l Left or r Right button to select On.
4.When you hear a beep sound or voice guidance, press the x B&W Start or x Color Start button to start the transmission.
Basic Faxing (Fax Model Only) | 14 |