EPSON AcuLaser CX11 Series Basic Operation Guide

Note:

❏Make sure the ADF cover is closed firmly. If the ADF cover is open, the document table is preemptively scanned and a blank copy is output even if an original is set on the Auto Document Feeder.

❏If you load multiple pages in the Auto Document Feeder, the pages will be fed from the top and then ejected face-down.

Making a copy

Available paper sources:

❏The available paper types for copying are not the same as that for printing. Depending on the paper source, available paper types differ. When copying originals, you can only use the following paper types.

MP tray:

Plain paper, EPSON Color Laser Paper, Letterhead, Recycled paper, Colored paper, Transparencies, Labels

Optional paper cassette:

Plain paper, EPSON Color Laser Paper, Letterhead, Recycled paper, Colored paper

❏You cannot copy onto coated paper, thick paper and special paper such as postcard or envelopes.

Available original sizes:

❏You can use A4, B5, Letter, and Legal size originals for copying.

❏Legal size originals are available only with the Auto Document Feeder.

❏The edge of the paper (5 mm from the horizontal and vertical paper ends) is not guaranteed for printing.

Follow the steps below to make a copy.

1.Make sure the product is turned on and paper is loaded in the product. For details, see the User’s Guide.

2.Press the Copy button on the control panel.

The Copy light is lit and the LCD panel shows Copy Mode for a few seconds, and then changes to the copy mode screen.

Note:

If no button is pressed for more than 3 minutes, any changes made are canceled and the mode returns to the Print mode.

3.Place your original either on the document table or in the Auto Document Feeder (fax model only). For details, see “Setting your originals.”

4.Specify the desired copy settings if necessary. For details, see the User’s Guide.

Note:

When you press the x B&W Start or

x Color Start button without making any settings here, copying starts with the existing setting values.

5.Press the x B&W Start or x Color Start button.

To make a black-and-white copy, press the x B&W Start button. To make a color copy, press the x Color Start button.

Copying starts.

Basic Copying

8