Epson CX11NF, CX11, CX11F Auto Document Feeder (fax model only), Insert a stack of documents, 1.Maximum unreadable area of 1.5 mm, 2.Maximum unreadable area of 1.5 mm

EPSON AcuLaser CX11 Series Basic Operation Guide

Note:

The area with a width of 1.5 mm from both horizontal and vertical rulers cannot be scanned.

1.Maximum unreadable area of 1.5 mm

2.Maximum unreadable area of 1.5 mm

2

1

3.Close the document cover gently so that the original does not move.

Note:

❏Always keep the document table clean.

❏Do not leave photos on the document table for an extended period of time as they may stick to the glass.

❏Make sure the document is flat against the glass surface, otherwise the image will appear fuzzy and out of focus. Also be sure to close the document cover to prevent interference from external light.

Auto Document Feeder (fax model only)

The Auto Document Feeder can automatically feed up to 50 sheets.

cCaution:

To scan an original correctly, set the

transportation lock on the left side of the document table in the unlocked position. See “Scanner parts.”

Note:

When scanning an original using the Auto Document Feeder, scanning quality may be lower than when scanning an original on the document table.

Follow the steps below to load documents in the Auto Document Feeder.

1.Slide the edge guides all the way outward.

2.Insert a stack of documents face-up in the Auto Document Feeder until it meets resistance, and then move the edge guides so they are flush with the edges of your documents.

Basic Copying 7