Copying a Photo

1. Press the P On button to turn on the Epson Stylus

 

 

12:00 PM

Y

CX5800F. You see a screen like this:

 

 

 

 

2.Place the photo on the glass as described on page 9. Be sure to close the document cover.

3.Load up to 20 sheets of letter-size, 4 × 6-inch, or 5 × 7-inch photo paper. See page 7 for details.

4.Press the Copy button. You see this display:

5.If you want borderless photos (printed without a white border), press the Copy button again to select Fit to Page mode. (If you select 100%, photos are printed with a 0.12-inch [3 mm] border.) The display changes to this:

Copies:1 100%

Copies:1 FitPage

6.To make multiple copies (up to 99), press the number keys on the numeric keypad. The display shows the number you select.

Note:

If you need to cancel the number of copies selected, press the y Cancel/Back button. To exit Copy mode, press the y Cancel/Back button again.

7.Press the paper type button to select Photo Paper.

8.Press the paper size button to select Letter, 4”x6”, or 5”x7”.

9.To make a color copy, press the x Start Color button.

To make a black and white copy, press the x Start B&W button.

Printing appears on the display and the Epson Stylus CX5800F starts copying.

If you need to stop copying, just press the y Cancel/Back button. Do not pull out paper that is being printed; it will be ejected automatically to the output tray.

Note:

The copies may not be exactly the same size as the original.

When making a lot of copies, it is a good idea to remove the printed copies from the output tray after every 10 sheets or so.

12Copying a Photo or Document