Display message

Cause and solution

 

 

Paper thickness lever is set for

The paper thickness lever is set to the

printing sheets of paper.

m L position. If you are printing on paper

 

sheets, press x Start Color or x Start B&W

 

to continue. If you’re printing on envelopes,

 

set the lever to the ^ H position.

 

 

Service required. See your

An Epson Stylus CX5800F part needs to be

documentation for details.

replaced. Contact your local authorized

 

servicer or contact Epson for a referral. See

 

page 60 for details.

 

 

Printer error -> or

There is a problem with the Epson Stylus

Scanner error ->

CX5800F. Turn it off and then back on. If the

See your documentation and call

error does not clear, contact your local

authorized servicer or contact Epson for a

service if necessary.

referral. See page 60 for details.

 

 

 

Problems and Solutions

Check the solutions below if you have trouble using your Epson Stylus CX5800F.

Copying Problems

■Make sure your original is positioned in the top left corner of the glass. Place it 0.04 inch (1 mm) from the edges to avoid cropping.

■Make sure your paper is loaded short edge first and is positioned against the right edge guide with the left edge guide against its left side. Don’t load paper above the arrow mark inside the left edge guide.

Solving Problems 57