Display message | Cause and solution |
|
|
[Cyan, Magenta, Yellow, Black] Ink | An ink cartridge that is not supported by the |
cartridge error | Epson Stylus CX5800F is installed. See |
replacement is necessary. Press the | page 50 for replacement instructions. |
OK button to begin. |
|
|
|
No memory card | A memory card is inserted that is not |
| supported by the Epson Stylus CX5800F. |
| Remove the incompatible memory card. See |
| page 17 for details. |
|
|
No photos on memory card | The inserted memory card does not contain |
| any valid images. See page 16 for a list of |
| compatible card and image types. |
|
|
No index sheet detected or sheet | An index sheet was not recognized because |
placed incorrectly. Correct the sheet | it is not positioned correctly. Align the top of |
placement and try again. | the sheet with the left edge of the glass. See |
| page 19 for details. |
|
|
No photos selected or photos | No marks are detected on the index sheet or |
marked incorrectly. Select photos | the sheet includes more than one mark for an |
correctly and try again. | image. Remove the index sheet, mark it |
| correctly, and try again. See page 19 for |
| details. |
|
|
Memory card data does not match | The index sheet does not match the photos |
index sheet. Replace the card or | on the memory card. Remove the card and |
index sheet and try again. | insert the one used to print the index sheet |
| (see page 17), or place the correct index |
| sheet on the glass (see page 19). |
|
|
Fax not sent. Resend using the Start | You sent a fax using the x Start Color button |
B&W button. | to a fax machine that prints only in black and |
| white. Send the fax again (see page 39), but |
| press the x Start B&W button. You can also |
| select to send faxes only in black and white. |
| See page 34 for details. |
|
|
Paper thickness lever is set for | The paper thickness lever is set to the |
envelope printing. | ^ H position. If you are printing on |
| envelopes, press x Start Color or |
| x Start B&W to continue. Otherwise, set the |
| lever to the m L position. |
|
|
56Solving Problems