3.Close the scanner lid.

4.Press the Copy button to enter Copy Mode.

5.The default copy settings are displayed on the LCD screen. Change any necessary copy settings, as described in “Changing Copy Settings” below.

6.Press the x Color button (to make color copies) or the x B&W button (to make black-and-white copies). Your document is scanned then printed. If you’re using the 2-upor 4-upCopy Layout setting (see “Copy Layout” on page 17), follow the instructions on the LCD screen to scan additional sheets.

Caution:

Never open the scanner while scanning or copying, or you could damage the CX6600.

Changing Copy Settings

The current copy settings are shown on the LCD screen. You can change the settings as described below.

Copy Mode button

Paper type

Reduce/enlarge

Number of copies

Print quality

Menu selection buttons

Paper size

Note:

You can save the current copy settings (except for the number of copies) by pressing the Save button for 3 seconds until you see the message “Stored” on the screen. To recall these settings, press and hold the Recall button for 3 seconds.

If you want to clear the current copy settings and return the CX6600 to its default settings, press and hold the Reset button for 3 seconds.

14Copying