Inserting a Memory Card
1.Make sure the CX6600 is turned on.
2.If you will be printing from or scanning to the card, make sure your CX6600 is not connected to your computer (or your computer is turned off).
If you want to copy images between the card and your computer, leave the computer connected. Any images stored on the card will be automatically copied to your computer once you insert the card (see page 21).
3.Open the memory card cover.
4.Make sure the memory card light (next to the memory card slots) is not flashing and that no cards are in any of the slots. Then insert a card into the correct slot, as shown on page 19.
Note:
Do not insert more than one card at a time, or you may not be able to tell which card your images are being read from.
After the CX6600 reads the card, if it finds any images saved in a compatible format (see note below), you see the following screen:
Found Images... |
|
Total XXX | OK |
5. Press the button next to OK (shown on the LCD screen).
20Using Memory Cards