Scanning to a Card

Follow these steps to scan an image to a memory card and save it in JPEG format:

1.Make sure your CX6600 is not connected to your computer (or your computer is turned off), then insert a memory card (see page 20).

Note:

If the card is not properly formatted, you see a message on the LCD screen. Press the button indicated on the LCD screen to format the card. Any data stored on the card will be erased.

2.Press the Scan button to enter Scan Mode.

3.Press the green button next to the LCD screen until To Photo Card appears, then press OK.

Note:

You can also scan to your computer or create an e-mail with the scanned image attached. Select either To PC or To E-mail, then see your on-screen Reference Guide for details.

4.Select the document type (Text or Graphic).

5.Select Auto as the scan area. (If the edges of

your document are light in color, they may Document type

Scan area

not be detected and part of your image may

 

 

be cut off; in that case, select Max. to scan

 

 

the entire area.)

 

 

6. For ordinary documents, select Normal as

Image quality

 

the quality of the scanned image. For

 

 

 

higher quality, select either Fine (for text)

 

 

or Graphic (for photos).

 

 

Note:

Higher quality images take up more space on the memory card.

7.Press the button next to OK (shown on the LCD screen).

8.Make sure your original document is placed on the scanner glass, then press the x Color button to start scanning. Your image is saved to the “epscan” folder on the memory card.

Caution:

Never open the scanner while scanning or copying, or you could damage the CX6600.

9.Wait until scanning finishes and the memory card light stops flashing, then remove the card.

30Scanning to a Card