Epson CX7000F Sending a Fax, Receiving a Fax, Manually Entering or Redialing a Fax Number

Epson Stylus CX7000F Series

8.If you need to change the Dial Mode, DRD, ECM, V.34, or Rings to Answer settings, press the u or d button, or press the 5 key on the numeric keypad, to display this option:

9.Press the x Start Color/OK button. You see this display:

5.Communication

1.Dial Mode: Ton

If you want to redial the last fax number you used, press the Redial/Pause button instead of entering a fax number. The last fax number appears on the screen.

3.To send a black and white fax, press the x Start B&W button.

To send a color fax, press the x Start Color/OK button.

	You see this display during
		Scanning 001 98%
	faxing:

10.To change the Dial Mode setting, press x Start Color/OK and go to step 11.

To change another Communication setting, press the

u or d button, or press the 2, 3, 4, or 5 key on the numeric keypad, to display one of these options:

❏2.DRD

❏3.ECM

❏4.V.34

❏5.Rings to Answer

Then press the x Start Color/OK button.

11.Press the u or d button until the setting option you want is displayed, then press the x Start Color/OK button to select it.

12.Repeat steps 10 and 11 to change any other settings. When you’re finished, press the y Cancel/Back button to return to the screen displaying the date.

Sending a Fax

Before you fax, place your original photo or document on the document table glass. Then send your fax by manually entering a fax number or redialing the previous fax number. You can also set up and select an entry from your speed dial list (see the Basics Guide for more information).

Manually Entering or Redialing a Fax Number

1. Press the Fax button once to enter Fax mode. The Fax

	button lights up and you see
		Enter Fax Number
	this display:

	2. Press the keys on the numeric
		1234567890
	keypad to enter the fax

	number. You can enter the

numbers 0 to 9 and the

characters * and #, up to 64 digits total.

Note:

If you need to change a character to the left, press the l button to delete the character and re-enter it. Press the r button if you need to move the cursor to the right.

Note:

If you need to cancel faxing at any time, press the y Cancel/Back button.

	4. After your original is scanned,	Send another pag
	you see this screen:	Send another pag
	you see this screen:

If you do not need to fax another page, press the 2 key (for No). The CX7000F Series dials the fax number and faxes your document.

Note:

If the fax number is busy or there is some other connection problem, you see an error message and the CX7000F Series redials the number after one minute. Wait for the redial, or check your connection and settings and try faxing again.

If you need to fax another page, press the 1 key (for Yes). Open the document cover, remove your first original, place your next original, and close the document cover. Then press the x Start Color/OK button to fax the next page. Repeat this step to fax all the necessary pages.

Note:

If you’re sending a color fax, or a large document that fills up the memory area, the CX7000F Series scans and faxes one page at a time. It then asks if you want to send another page. The fax connection stays open until you are finished.

Receiving a Fax

The CX7000F Series automatically receives and prints faxes in Auto Answer mode. However, you may want to receive faxes manually if you connected the CX7000F Series and a phone or answering machine to a phone line that also receives voice calls. Then you can check for a fax tone from the sending fax machine and press a button on the CX7000F Series to receive the fax, or allow your answering machine to determine if the call is an incoming fax.

Note:

Make sure you selected the Paper Size setting that matches the size of paper you’ve loaded. If the incoming fax pages are larger than the paper size you loaded, the fax size is reduced to fit or printed on multiple pages, depending on the Automatic Reduction setting you select (see page 11 for details).

10/06