Epson CX7000F Setting Up Your Fax Features, Connecting a Phone or Answering Machine, Creating Header Information

Epson Stylus CX7000F Series

5.Press the paper size button to select Letter, 4"x 6", or

5"x 7".

6.Connect the USB cable that came with your camera to the camera and the USB connector on the front of your CX7000F Series.

Setting Up Your Fax Features

Before sending or receiving faxes, you may want to create a fax header and select your fax preferences.

Creating Header Information

1.Press the Fax button once to enter Fax mode. The Fax

button lights up and you see	Enter Fax Number
this display:
this display:

	7. Make sure your camera is
	turned on. The following
	turned on. The following	PictBridge
	appears on the display screen:	PictBridge

8. Select the photos you want to print with your camera. Then

2.Press the Setup button. You see this display:

3.Press the u or d button, or press the 6 key on the numeric keypad, to display this option:

4.Press the x Start Color/OK button. You see this display:

1.Select Speed D

6.Header & Time

1.Fax Header Set

adjust any necessary settings and print your photos as

explained in your camera manual.

Note:

Depending on the CX7000F Series settings and your digital camera settings, some combinations of paper type, size, and layout may not be supported. In addition, some of your digital camera settings may not be reflected in the printed output. Epson cannot guarantee the compatibility of any camera.

Connecting a Phone or Answering Machine

If you’re connecting the CX7000F Series to a phone line, and connecting a telephone or answering machine to the same phone line so you can use it to make voice calls, follow these steps:

1.Connect the phone cable leading from the wall jack to the LINE port.

5.Press the x Start Color/OK button again. The display goes blank except for the cursor (_).

6.Press the keys on the numeric keypad to enter up to 28 digits of header information. Use the number keys to enter the letters A to Z (in uppercase or lowercase), the numbers 0 to 9, and various symbols.

Press a key repeatedly to display first the numbers and symbols (if available), then the uppercase and lowercase letters, as indicated on the key. Then wait a moment or press the r button to move to the next character space. When you’re finished, press the r button to move to a blank space.

Note:

If you need to change a character to the left, press the l key to delete the character and re-enter it. Press the r key if you need to move the cursor to the right.

7.Press the x Start Color/OK button. You return to the

1.Fax Header Setup display.

2. Connect one end of another phone cable to the telephone or answering machine.

8.Press the u or d button, or press the 2 key on the numeric keypad, to display this option:

9.Press the x Start Color/OK button. You see this display (to indicate the two-digit month, day, and year):

2.Date/Time

MM:DD:YY

3.Connect the other end of the phone/answering machine cable to the EXT port on the back of the CX7000F Series.

You also need to set up your CX7000F Series to receive faxes manually (see page 13 for details).

10.Press the keys on the numeric keypad to enter the date. You can enter the numbers 0 to 9.

11.Press the x Start Color/OK

button. You see this display (to

indicate the hour and minute): HH:MM AM

10/06