Epson Stylus CX7000F Series

2.Place the index sheet face-down on the glass, in the upper left corner, so that the top of the sheet is aligned against the left edge of the glass.

3.Close the document cover.

Note:

Don’t remove the memory card while you’re printing from an index sheet.

4.Load up to 100 sheets of plain paper or up to 20 sheets of photo paper at a time (see page 4 for details). You can load more paper later as necessary to print all your selected photos.

The display should now look

 

like this, indicating that the

 

CX7000F Series is ready to

 

2.Img:92 Scn Idx

scan the index sheet:

 

If this setting is not displayed, press the Memory Card

button until it is displayed.

 

5.Select Plain Paper or Photo Paper (whichever you loaded).

If you select Plain Paper, the photos print with a white border. If you select Photo Paper, the photos print borderless, to the edge of the paper.

6.Select Letter, 4"x 6", or 5"x 7" for the paper size.

7.Press the x Start Color/OK button to start printing.

Note:

If you need to stop printing, press the y Cancel/Back button.

8.When you are done printing, wait until the memory card access light is not flashing, then remove the memory card by pulling it straight out of its slot.

Printing All Photos or DPOF Photos

Follow the steps below to print one copy of each photo on the card or to print only those photos that were pre-selected with your camera’s DPOF (Digital Print Order Format) feature.

1.Load up to 100 sheets of plain paper or up to 20 sheets of photo paper at a time (see page 4 for details.) You can load more paper later as necessary to print all your photos.

2.Insert the memory card (see page 7 for details).

3.Press the Memory Card button repeatedly, until the

display looks something like

3.Img:92 All/DPO

this:

 

 

Note:

If the memory card does not contain DPOF information, one copy of all the photos on the card will be printed.

4.Select Plain Paper or Photo Paper (whichever you loaded).

If you select Plain Paper, the photos print with a white border. If you select Photo Paper, the photos print borderless, to the edge of the paper.

5.Select Letter, 4"× 6", or 5"× 7" for the paper size.

6.Press the x Start Color/OK button to start printing.

Note:

If you need to stop printing, press the y Cancel/Back button.

If you see the Paper Out message, load more paper and press the x Start Color/OK button.

When you are done printing, wait until the memory card access light is not flashing, then remove the memory card by pulling it straight out of its slot.

Printing From a Digital Camera

If your camera is PictBridge™- or USB DIRECT-PRINT™- compatible, you can print your JPEG photos by connecting your digital camera directly to your CX7000F Series. Your photos must be sized from 80 × 80 pixels to 9200 × 9200 pixels.

1.Make sure your CX7000F Series is not printing.

2.Remove any memory cards from slots.

3.Load the type of paper you want to use (see page 4). Load enough sheets for the number of photos you’ll be printing.

4.Press the paper type button to select Photo Paper to print borderless photos (without a white border). Select Plain Paper if you want your photos printed with a small white border.

10/06

9