Inserting the Card
1. Make sure the CX7400 Series is turned on.
Note:
When you print directly from a memory card, it is best if the CX7400 Series is not connected to your computer or the computer is turned off. If you see a message on your computer screen when you insert a card, cancel the operation and close the screen.
2. Insert your card into the correct slot as shown:
Insert just one card at a time (it won’t go in all the way)
Left slot | Right slot |
Memory card access light
The memory card access light flashes and stays lit. Now you can:
■Print an index sheet so you can select which photos to print (see page 15)
■Print photos
When you want to remove the card, make sure the memory card access light is not flashing, then pull the card straight out of its slot.
Caution:
Do not remove the card or turn off the CX7400 Series while the memory card access light is flashing; you may lose data on the card.
14Printing From a Memory Card or Digital Camera