Epson CX7400 Printing From a Digital Camera

Printing From a Digital Camera

If you have a digital camera that supports PictBridge™ or USB DIRECT- PRINT™ printing, you can connect it to the CX7400 Series and print your photos directly from the camera. Check your camera manual to see if it is compatible. Your photos must be JPEG format and sized from 80 × 80 pixels to 9200 × 9200 pixels.

Note:

Epson cannot guarantee the compatibility of any cameras. Some combinations of paper type, size, and layout may not be supported, depending on your camera and the CX7400 Series settings.

1.Before you connect your camera, make sure your CX7400 Series is turned on, but not printing.

2.Remove any memory cards from the slots.

3.Connect the USB cable that came with your

camera to the USB connector on the front of your CX7400 Series.

4. Load the paper on which you want to print your photos (see page 4).

5. Press the paper size button to select the size and type of paper you loaded.

If you select Letter Size Plain Paper, the photos print with a white border.

If you select 4"x6" Photo Paper, the photos print all the way to the edges (borderless).

6.Turn on your camera.

7.Follow the instructions that came with your camera to select your photos and settings, and print them.

When you finish printing, turn off your camera and disconnect it from the USB connector on the CX7400 Series.

18Printing From a Memory Card or Digital Camera