Restoring Photos

You can restore old, faded 4 × 6-inch and 5 × 7-inch photos to their original brilliance. You can also make copies or edits of single or multiple photos.

1.Press the P On button to turn on the CX8400 Series.

2.Load 4 × 6-inch, 5 × 7-inch, A4- or letter-size Epson photo paper.

3.Place your original photo on the document table.

Note:

You can copy up to 2 photos at the same time. Place them 0.2 inches (5 mm) apart.

4.Press the Restore button, and press OK.

5.To turn on Color Restoration, press r and select On and press OK. (If your photo is not faded, do not turn on Color Restoration.)

6.Press OK again to prescan your photo. You see these settings over a preview of your photo:

7.To print more than 1 copy, press + or – to select the number.

8.If you want to crop your photos and enlarge the resulting image area to fit onto your paper, press

Display/Crop.

■To resize the image area, press + or –.

■To move the image area, use the arrow buttons.

■To check the zoomed image, press OK.

After you are done cropping your photo, press OK.

9.To change print settings, press Menu and select your settings (see page 13). When you’re done, press OK.

10.Press x Start to begin copying.

To cancel copying, press y Stop/Clear Settings.

12Copying a Document or Photo