4Setting Up the Printer
cCaution:
There are several models of the printer designed for different
voltages, and it is not possible to adjust the printer for use with
another voltage. If the label on the back of the printer does not
show the correct voltage for your country, contact your dealer.
You must remove all protective materials packed around and
inside your printer before you set it up and turn on the power.
Follow the directions on the Notice Sheet (packed with the
printer) to remove these materials.
Save all packing and protective materials in case you need to ship
the printer in the future. It should always be transported in its
original packing materials.
1-2 Choosing a Place for the Printer
Follow these guidelines when selecting a location for your printer:
❏Place the printer on a flat, stable surface. The printer will not
operate properly if it is tilted or placed at an angle.
❏Place the printer where you can easily connect it to a network
interface cable, if necessary.
❏Leave adequate room around the printer for easy operation
and maintenance.
❏Avoid using or storing the printer in places subject to rapid
changes in temperature and humidity. Keep it away from
direct sunlight, strong light, heat sources, or excessive
moisture or dust.
❏Avoid places subject to shocks and vibrations.
❏Place the printer near a wall outlet where you can easily
unplug the power cord.