Epson DW073 instruction manual Applications, Ceiling Installation, Wall Layout

English

market today. The clamp attaches the Digital Laser Detector to grade rods, leveling poles, wall studs or posts. The detector can also be mounted to ceiling track by attaching the magnets on the top of the detector to the track.

VOLUME

LEVEL

BATTERY

POWER

ONCOMPARTMENT

If this laser kit contains a DEWALT Digital Laser Detector, a separate instruction manual has been included. For proper use and operation read and understand the Detector manual before use.

Applications

The DW073 Cordless Rotary Laser is a versatile and accurate tool that can be used for both interior and exterior construction and remod- eling projects. The laser level can be adjusted and positioned for use on dozens of horizontal (level) and vertical (plumb) applications. A few of the most common applications are listed below. General user steps are listed for each application to serve as a guide. They are not intend- ed to provide you with detailed instructions to complete each leveling or plumbing project.

Ceiling Installation

1.Follow the instructions in this manual for operating the built-in Wall Mount.

2.Securely attach the tool to the wall track and adjust the laser to your offset height.

3. Follow the instructions for leveling the laser.

TIP: Remember the front leveling knob con- trols the front bubble vial, the side leveling knob controls the side bubble vial.

4. Turn the laser on if not on already; adjust rota- tion speed and controls as needed. Remember: Slow Speed = Bright Beam; Fast Speed = Solid Beam.

5. Use the Laser Target Card to help you find the rotating laser beam reference plane. Attach

the magnetic base of the Laser Target Card to the ceiling track cross sections. TIP: Wear the

Laser Enhancement Glasses to help improve the visibility of the laser beam to your eyes.

6.You can now begin to accurately level the ceiling grid/track for ceiling installation.

Wall Layout

1.Follow the instructions in this manual for operating the built-in Floor Mount.

2.Use the Two-Position Pivoting Head Adjustment Knob to pivot the laser head for a plumb setting.

3.Position the laser over a predetermined benchmark on the floor and adjust the tool by utilizing the Rack 'N Pinion Adjustment Knobs.

4.Follow the instructions for plumbing the laser.

5.Turn the laser on if not on already; adjust rotation speed and con- trols as needed. Remember: Slow Speed = Bright Beam; Fast Speed = Solid Beam.

6.Use the Laser Target Card to help you find the rotating laser beam reference plane and to transfer your mark. TIP: Wear the Laser Enhancement Glasses to help improve the visibility of the laser beam to your eyes.

7.You can now begin to plumb and layout your walls by accurately transferring the reference points on the floor to the ceiling.

14