3.Press and release the B ink button.
The ink cartridge holder moves to the check position and the On and B ink lights flash. If one of the cartridges is low or expended, the product moves that cartridge to the _ mark.
If none of the cartridges are low or expended, the print head moves to the ink cartridge replacement position. Go to step 5.
Note:
Do not hold down the B ink button. If it is held down for three or more seconds, print head cleaning begins.
4.Press the B ink button again.
■If more than one cartridge is expended or low, the next cartridge moves to the _ mark.
■When all of the expended or low ink cartridges have been identified, the print head moves to the ink cartridge replacement position.
5.Open the cartridge cover.
cCaution:
❏Never attempt to open the cartridge cover while the print head is moving. Wait until the cartridges have moved to the replacement position.
❏Be careful not to touch the parts highlighted below.
6.Remove the cartridge you need to replace. Squeeze the tab at the back of the cartridge and lift it straight out. Dispose of it carefully.
cCaution:
Do not refill the ink cartridge. Other products not manufactured by Epson may cause damage that is not covered by Epson's warranties, and under certain circumstances, may cause erratic printer behavior.
7.Before you open the new ink cartridge package, shake it four or five times. Then remove it from the package.
cCaution:
Do not touch the green chip on the side of the cartridge. This can damage the ink cartridge.
18Maintenance