8.Remove the yellow tape from the bottom of the ink cartridge.
cCaution:
❏You must remove the yellow tape from the cartridge before installing it; otherwise, print quality may decline or you may not be able to print.
❏If you have installed an ink cartridge without removing the yellow tape, take the cartridge out of the printer, remove the yellow tape, and then reinstall it.
❏Do not remove the transparent seal from the bottom of the cartridge; otherwise, the cartridge may become unusable.
❏Do not remove or tear the label on the cartridge; otherwise, ink will leak.
9.Place the new ink cartridge into the holder and push it down until it clicks into place.
10.Replace any other ink cartridges that need to be replaced.
11.Close the ink cartridge cover and press it until it clicks into place.
cCaution:
If you find it difficult to close the cover, make sure all the cartridges are firmly seated. Press down on each cartridge until you hear it click into place. Do not attempt to force the cover closed.
English
12. Close the scanner unit.
13.Press the B ink button.
The product begins charging ink and the On light starts flashing. This takes about one minute. When it has finished, the On light stops flashing and remains on, and the B ink light goes out.
cCaution:
Do not turn off the product during ink charging as this will waste ink.
Note:
If the B ink light stays on (not flashing), the ink cartridge may not be installed correctly. Press the B ink button again and reinstall the ink cartridge until it clicks into place.
Maintenance 19