1.Load A4 plain paper (& page 6).

2.Place your original on the document table

(& “Placing Originals on the Document Table” on page 8).

3.Make the following settings on the control panel.

Icon panel

Text panel

Press the r Copy button.

Use the u or d button to select the number of copies (1 to 99).

Icon display

Text display

Use the l or r button to select color copy or black-and-white copy.

Display

Color Copy

Black-and-

 

 

White Copy

 

 

 

Icon

Text

Select l [Plain Paper].

Select A4.

Tip:

If you want to automatically resize the copy to the size of paper that you loaded, press the r Copy button until the icon shown below is displayed on the LCD screen.

Icon display

Text display

Press the x Start button. Your document is copied.

If you need to stop copying, press the y Stop/Clear button.

Note:

If the edges of the copy are cropped off, move the original away from the corner slightly.

Selecting copy quality

If you want to make a copy quickly and do not need high quality, you can print a “Draft” copy. Alternatively, if you want to print high quality photos, you can print a “Photo” copy.

1.Press the F [Setup/Utilities] button to enter the setup mode. Use the l or r button to select Copy Quality.

2.Press the x Start button.

3.Use the u or d button to select Normal, Draft, or

Photo.

Setting

 

Description

 

 

 

Icon display

Text display

 

 

 

 

 

 

Normal:

 

 

This is automatically

 

 

selected when you

 

 

turn the product on.

 

 

This mode is the

 

 

best for text copy.

 

 

 

 

 

Draft:

 

 

Select this if you

 

 

want to make a

 

 

quick copy and

 

 

quality is not

 

 

important.

 

 

 

 

 

Photo:

 

 

Select this if you

 

 

want to print high

 

 

quality photos.

 

 

 

4.Press the x Start button again to confirm your selection.

Press the F [Setup/Utilities] button to return to the previous mode.

English

Copying 9