Copying Photos

1.Load photo paper (& page 6).

2.Place your original on the document table

(& “Placing Originals on the Document Table” on page 8).

You can place more than two photos on the document table at one time (& “Copying multiple photos” on page 11).

3.Make the following settings on the control panel.

Icon panel

Text panel

Press the Photo button.

Use the l or r button to set the color restoration mode to on or off (& “Restoring color in photos” on page 11).

Press the x Start button. The photo is scanned and a preview is displayed on the LCD screen.

During scanning, one of the following screens is displayed.

Icon display

Text display

Icon panel

Text panel

Use the l or r button to view the photos. Use the u or d button to set the number of copies.

Select the paper type you loaded.

If you select Photo or Matte paper, your photo is copied without a border.

Select the paper size you loaded.

Press the x Start button again. Your photo is copied.

If you need to stop copying, press the y Stop/Clear button.

Note:

If the edges of the copy are cropped off, move the original away from the corner slightly.

10Copying