Displaying System Information

The SETUP program provides a system information screen which lists the following:

Cl Processor type

Ll Coprocessor type (if one is installed)

Cl Reserved memory

Ll BIOS version number

Cl Addresses for video mode, serial ports, and printer ports.

To see this information, press F2 from either of the SETUP screens.

Setting the Date and Time

The real-time clock in your computer continuously tracks the date and time-even when the computer is turned off. Once you set the date and time using SETUP, you should not need to change them, unless you adjust the time for daylight savings or other seasonal adjustments. (The computer automatically changes the date for leap years.)

Use ?, J, t or + to move the cursor to the value you want to change. Then press + or - until you see the value you want.

1-10 Setting Up Your System