4.Position the coprocessor over the socket as shown below. Align the notched corner of the coprocessor (marked with a dot) over the corresponding comer in the socket.
notched ’ corner
Be sure to align the pins in the coprocessor directly over the holes in the socket. If you insert the math coprocessor in the wrong position, you could permanently damage it.
5.Make sure the pins in the coprocessor are directly over the holes in the socket. Then gently push the coprocessor straight into the socket, pressing evenly on all sides.
6.Replace any option cards you removed. See page
Post-installation Procedures
After you install or remove options such as memory modules or a math coprocessor, you must run SETUP to update the computer’s configuration. See Chapter 1 for instructions. Additionally, you may need to add some commands to your configuration files. See your operating system manual and the manual that came with your optional equipment.