Note

If you are installing a monochrome monitor, you also need to set jumper J11 on the main system board to position 2-3. See Chapter 3 for more information on setting jumpers.

Setting Keyboard Options

Two options in the SETUP program allow you to control keyboard settings. The Keyboard option allows you to disable the built-in keyboard connector if you are using an optional connector.

The NumLock on at boot option determines the initial state of the num lock function when you turn on or reset your system. When num lock is off, the keypad controls cursor movement. If num lock is on, the keypad types numbers.

Select YES to set the num lock function on when the system starts.

Setting the Processor Speed

The CPU Speed option sets the processor speed to fast or slow. At fast speed, your processor operates at its fastest speed, 33 MHz. At the slow speed setting, the processor operates at

8 MHz to provide compatibility with older application programs.

Note

The Cyrix cache option is not available on this system.

1-16 Setting Up Your System