Troubleshooting 84
fCannot control or monitor the projector with EMP Monitor
fError message when starting up EMP Monitor
Is power being supplied to the projector? Check that your electrical outlet or power source is functioning correctly.
Is the network cable connected correctly? Check that the network cable is connected correctly. Reconnect it if it is not connected or not connected
properly.
Check Remedy
Is the wireless LAN unit connected? Check that the wireless LAN unit is securely connected.
Is the network connect setting correct? Check the projector’s network settings. sUser’s Guide "Network Menu (EMP-1715/1705 Only)"
Is EMP Monitor correctly installed in the computer? Uninstall and then reinstall EMP Monitor.
Are all of the projectors that you want to monitor and
control registered to the projector list?
Register them to the projector list. sEMP Monitor Operation Guide "Registering and deleting projectors for
monitoring"
Is "Standby Mode" set to "Network On"? To use the mail notification function when the projector is in standby, set "Network On" in "Standby Mode"
from the configuration menu. sUser’s Guide "Extended Menu"
Is power being supplied to the projector? Check that your electrical outlet or power source is functioning correctly.
Is the network cable connected correctly? Check that the network cable is connected correctly. Reconnect it if it is not connected or not connected
properly.
Check Remedy
The password is incorrect. The wrong password was entered. Enter the correct password. If you forget the password, start "Network
Settings" in "Network" from the configuration menu, and check "Web Control Password" in "Basic Settings".
Cannot connect to the projector for the IP address
that was entered.
Check whether the network settings for the projector you want to connect to, the wired LAN or "Advanced
Connection Mode (wireless LAN)" are the settings that are used.When "Quick Connection Mode" is selected
from "Wireless LAN", the setting is changed to "Advanced Connection Mode".
Next, check the "IP Address" for the "Wired LAN" or the "Wireless LAN" and register the "IP Address"
manually. s EMP Monitor Operation Guide "Registering and deleting projectors for monitoring"
If it still does not connect, check the network settings on the computer and the network settings for the
projector.
For network settings, s Wireless LAN Quick Connection Guide
Check Remedy
For Wired LAN
For Wireless LAN
For Wired LAN