List of Functions 47
Operation Direct Power On: You can set whether Direct Power On is enabled (On) or disabled (Off).
When it is set to "On" and the projector power cable is connected to an electrical outlet, be aware that sudden surges of electricity when power
comes back on after a power outage may cause the projector to turn on automatically.
Sleep Mode: You can set whether projection stops automatically (On) or not (Off) when no operations are carried out for about 30 minutes while no
image signal is being input, or when about 30 minutes have elapsed since the A/V mute slide is closed.
High Altitude Mode: Set to "On" when using the projector above an altitude of 1500 m.
Standby Mode You can use network monitoring and control functions while the projector is in standby mode when this is set to "Network On".
You can use SNMPg to monitor and control the status of the projector over the network, or by using the "EMP Monitor" software*1 supplied with
this product.
USB Type B
(EMP-1825 only)
Set to "USB Display" when the projector and a computer are connected by a USB cable and computer images are projected. sWireless LAN
Quick Connection Guide
Set to "Wireless Mouse" when the mouse pointer is to be operated by the remote control. sp.30
Projector ID Set the ID within the range "1" to "9". "Off" indicates that no ID is set. sp.32
Multi-screen You can adjust the hue and brightness of each projected image when multiple projectors are lined up and projecting. sp.34
Adjustment Level: You can adjust from black to white in five stages called levels 1 to 5, and in each level 1to 5 you can adjust "Brightness
Correct." and "Color Correct".
Brightness Correct.: Corrects the difference in the brightness of each product.
Color Correct. (G/R) / Color Correct. (B/Y): You can correct the difference in the color of each product.
Language You can set the language for message displays.
Reset You can reset "Display*2" and "Operation*3", in the "Extended" menu to their default settings.
To return all menu items to their default settings, see sp.66
*1 To download EMP Monitor software, go to http://www.epson.com, select your local Epson Web site and then select the support section. EMP Monitor is software
that uses a computer to monitor and control the state of one or more projectors on a network.
You will need a serial ⇔ IP conversion adapter and cable to connect an EMP-1810 to a network so that you can monitor it with EMP Monitor. You can check
product information and operation compatibility at the homepage address mentioned above.
*2 When "User's Logo Protect" is set to "On" in "Password Protect", settings relating to user's logo cannot be changed. You can make changes after setting "User's
Logo Protect" to "Off". sp.37
*3 Except for "High Altitude Mode".
Sub Menu Function