Saving a User’s Logo 89
DThe image is recorded and a selection marquee box
is displayed. Move the box to select the part of the
image to use as the user's logo.
EWhen "Select this image?" is displayed, select
"Yes".
FSelect the zoom factor from the zoom setting
screen.
GWhen the message "Save this image as the User's
Logo?" is displayed, select "Yes".
The image is saved. After the image has been saved, the message
"Completed." is displayed.
qYou can save at up to 400
^
300 dots in size.
Using the remote control Using the control panel
q• Saving the user's logo may take about 15 seconds. Do not
use the projector or any connected equipment while it is
saving, otherwise malfunctions may occur.
• Once a user's logo has been saved, the logo cannot be
returned to the factory default.