100
Optional Accessories

The following optional accessories are available for purchase if required. This

list of optional accessories is current as of June 2001. Details of accessories are

subject to change without notice.

*A special method of instal la ti on is required in order to suspend the projector from the ceiling. Please
contact the place of purchase if you would like to use this installation method.
Hard travel case ELPKS26
Soft carrying case ELPKS27
Use this case if you need to carry the projector by
hand.
Spare lamp ELPLP15
Use as a replacement for spent lamps.
Portable screen (50 inch) ELPSC06
A compact screen which can be carried easily.
60 inch screen ELPSC07
80 inch screen ELPSC08
Mac adapter set ELPAP01
Use to connect the projector to a Macintosh
computer when the accessory or optional
computer cables cannot be used because the
connector shapes are different.
Computer cable ELPKC02
(6 ft (1.8 m) - for mini D-Sub 15-pin/mini D-
Sub 15-pin)
Use to connect the projector to a computer when
you would like to use UXGA display resolution.
Computer cable ELPKC09
(9.8 ft (3 m) - for mini D-Sub 15-pin/mini D-
Sub 15-pin)
Computer cable ELPKC10
(65.6 ft (20 m) - for mini D-Sub 15-pin/mini D-
Sub 15-pin)
Use this extension cable if the accessory
computer cable is too short.
Computer cable ELPKC11
(6 ft (1.8 m) - for mini D-Sub 15-pin/5BNC)
Use to connect the projector to a workstation.
Digital video cable ELPKC20
(9.8 ft (3 m) - DVI-D male-male)
DVI cable for connecting the projector to a
computer with a digital RGB output interface.
Digital video cable ELPKC21
(9.8 ft (3 m) - for DVI-D/DFP 20-pin)
DFP cable for connecting the projector to a
computer with a digital RGB output interface.
DVI analog cable ELPKC25
(9.8 ft (3 m) - for DVI-I/mini D-Sub 15-pin)
Use to connect the projector to conn ect two
computers with analog RGB output to the
projector.
Component video cable ELPKC19
(9.8 ft (3 m) - for mini D-Sub 15-pin/RCA x 3)
Use to connect a component video source.
Remote control receiver ELPST04
Use to control the projector with the remote
control from a distance.
Ceiling mount * ELPMB07
Use when installing the projector to a ceiling.
Ceiling plate * ELPFC03
Pipe 370 (14.57 inches (370 mm)/silver)*
ELPFP04
Pipe 570 (22.44 inches (570 mm)/silver)*
ELPFP05
Pipe 770 (30.31 inches (770 mm)/silver)*
ELPFP06
Use when installing the projector to a high ceiling
or a ceiling with veneer panels.
Image presentation camera ELPDC02
ELPDC03
Use when projecting books, OHP films and
slides.