95
4Take out the lamp.
Hold the lamp by the two recesses on the
side to lift it up and out from the projector.
5Install the new lamp.
Hold the lamp so that it faces the correct
way to fit into the projector, and then
insert the lamp until it clicks into place
and tighten the two fixing screws.
6Install the lamp cover.
Insert the two cover tabs into the
projector, and then press the other side of
the lamp cover until it clicks into place.
Tip :
• Install the lamp securely. If the lamp cover is removed, the lamp turns off
automatically as a safety precaution. Moreover, the lamp will not turn on if the lamp
or the lamp cover is not installed correctly.
• Replacement lamps are provided with a spare air filter. The air filter should also be
replaced when the lamp is replaced.
• Dispose of used lamps properly in accordance with your local regulations.