33
Tip :
• RGB video is only compatible with sync-in-green signals. This can be checked by
looking at SYNC Mode in the About menu.
• After making the connections, change the Comp1 Input or Comp2 /YCbCr Input
setting in the Setting menu to RGB Video.
For separate sync (separate H-SYNC and V-SYNC) signals, set to Analog-RGB.
(P.69) This can be checked by looking at SYNC Mode in the About menu.
• After making the connections, change the Audio Input setting in the Audio menu to
either Audio1, Audio2 or USB, depending on which input port you are using. The
default setting is Audio2.