14

Using the Remote Control and Remote Operating Range

The remote control is used in the following way.
Procedure
1Set the R/C switch on the remote
control to the ON position.
2Point the remote control
transmitter toward one of the
remote control receivers on the
projector and operate the remote
control buttons.
Tip :
• Do not allow sunlight or light from fluorescent lamps to shine directly onto the projector's remote control receivers, otherwise it may interfere with the reception of signals from the remote control.• Set the R/C switch on the remote control to the OFF position when not using the remote control. Leaving the R/C switch on will consume battery power.
Use the remote control within the ranges indicated below. If the distance or
angle between the remote control and the remote control receiver is outside the
normal operating range, the remote control may not work.

Using the Remote Control

Remote Operating Range

Operating distance Operating angleApprox. 32.81 feet (10 m) Approx. ±30° horizontallyApprox. ±15° verticallyPower
A/V MuteFreeze
E-Zoom
Esc
Menu
Comp1
Source
Video
Auto
Preset
Volume
P in P
S-Video
Resize
Comp2/YCbCr
Help
Remote control
receiver (front) Power
A/V MuteFreeze
E-Zoom
Esc
Menu
Comp1
Source
Video
Auto
Preset
Volume
P in P
S-Video
Resize
Comp2/YCbCr
Help
Remote control receiver (back)
Before Using the Remote Control