Epson EMP-61, EMP-81 "Extended" Menu

Using the Configuration Menu Functions 61

"Extended" Menu

•The "User’s Logo" setting can not be adjusted if no signals are being input.

Sub-menu	Function	Default
Display	This lets you make settings related to the projector's display.	Message: ON
	Message:
	Sets whether display of the following messages is turned
	"ON" or "OFF".
	• Signal name when the video signal is switched
	• Colour mode name when the colour mode is switched
	• When no image signals are being input
	• When an incompatible signal is input
	• When the air filter needs replacing	Background
	Background Color:
		Color:
	Sets the screen status when the [A/V Mute] button on the
		Blue
	remote control is being pressed or when no image signals
	are being input to "Black", "Blue" or "Logo".
	• To change the user's logo, you need to record your own
	logo. sp.90
	• If the "User’s Logo Protect" function of Password Protect
	has been set to "ON", the "Logo" setting cannot be
	changed from "Logo" to "Black" or "Blue", or from
	"Black" or "Blue" to "Logo". Cancel the Password
	Protect function before changing these settings. sp.29	Startup Screen:
	Startup Screen:
	Sets whether the startup screen is displayed or not.	ON
	To change the user's logo, you need to record your own
	user's logo. sp.90
	This cannot be changed from enabled ("ON") to disabled
	("OFF") if the "User’s Logo Protect" function of Password
	Protect has been set to "ON". Cancel the Password Protect
	function before changing the setting. sp.29
User’s	Records a user's logo. sp.90	EPSON logo
Logo	•Press the [Enter] button on the remote control or on the
	projector's control panel and then follow the instructions
	that appear on the screen.
	•A user's logo cannot be recorded if the "User’s Logo
	Protect" function of Password Protect has been set to "ON".
	Cancel the Password Protect function before recording a
	user's logo. sp.29