Saving a User's Logo

 

91

 

 

 

3

Select "Yes" in the sub-menu, then press the [Enter]

 

button.

4

The image to be recorded and a selection marquee

 

box will be displayed. Move the marquee box to select

 

the part of the image to use.

 

Tilt the [

] button on the remote control or press the [ ], [ ],

 

[ ] and [

] buttons on the projector's control panel to select the

 

area of the image to use as the user's logo, and then press the

 

[Enter] button.

TIP

When you press the [Enter] button on either the remote control or the projector's control panel, the image signal will be displayed at their original resolution, so if a signal with a resolution that is different from the panel resolution of the projector is projected, or if a video image is being projected, the display size will change.

TIP

User's logos can be saved at up to 480 ⋅ 360 dots in size.