Problems Solving

 

78

 

 

 

Interference or distortion appear in images

 

 

Check

Remedy

 

 

 

 

 

 

Are the image signal format settings correct?

If a composite videog or S-Videogsource is connected to the projector, use the "Video Signal"

 

 

 

 

 

menu command to select the signal format.

 

 

Only when projecting images

 

 

 

 

 

 

"Signal" - "Video Signal" sp.57

 

 

from a video source

 

 

 

 

 

 

 

 

 

Are the cables connected correctly?

Check that all of the cables required for projection are securely connected. sp.18– p.25

 

 

 

 

 

 

Is an extension cable being used?

If an extension cable is used, electrical interference may affect the signals. Use the accessory cables

 

 

 

 

 

and check if this helps.

 

 

 

 

 

 

Has the correct resolution been selected?

Set the computer so that the signals that are output are compatible with this projector.

 

 

 

 

 

"List of Supported Monitor Displays" sp.99

 

Only when projecting computer images

 

 

 

s Computer documentation

 

 

 

 

 

 

 

 

 

 

 

Have the "Sync.g" and "Trackingg" settings

Press the [Auto] button on the remote control or the [Enter] button on the projector's control panel to

been adjusted correctly?

carry out automatic adjustment. If the images have not been adjusted correctly after using automatic

 

 

 

 

 

adjustment, you can make the adjustments using the "Sync." and "Tracking" menus. sp.41, p.42

 

Computer and RGB video signals only