Epson EMP-S1 manual p

9
EMP-S1 User’s GuideBefore Using the Projector > Remote Control
fBefore using the Remote Control
Remove the insulating tape.
fUsing the Remote Control
Operate the remote control by aiming it at the remote control infrared
receiver on the projector.
fOperating range
Operable distance: Max. approx. 6m (20ft.)
(May be shorter depending on conditions.)
Operable angle: approx. 30° horizontally, 15° vertically
* The remote control infrared receiver on the back of the projector can also
be used under the same conditions.
fStorage
When not using the remote control, please store it in the remote control
holder on the projector.
AOpen the remote control holder.
BPlace the remote control in the remote control holder.
CClose the remote control holder until it clicks into
place.
pIf direct sunlight or fluorescent lighting hits the remote control
infrared receiver, you may not be able to use the remote control.
remote control
infrared receiver
remote control
infrared receiver
15°
15°
30° 30°
Max
6m